Rtu Supports in Etobicoke are custom structural-steel assemblies fabricated to the engineered drawing and load spec. The Grate Guys custom-fabricates every piece to your spec, load class, and finish, then ships and installs across Etobicoke, the GTA, and Ontario.
Fabricated in Canada in our Toronto shop, with Canadian steel.
Tell us what you need and we’ll get you a quote. Free, no-obligation estimate.
Free, no-obligation estimate.
We size the base plates and frame footprint so the unit's full operating dead load lands on the joists and beams below, not the roof deck. Every frame is detailed to your engineer's reactions so the path to structure is signed off before fabrication.
Each support is built tall enough to keep the RTU above the membrane, insulation, and curb flashing so water sheds and drains underneath. That clearance also lets roofers reflash around the legs years later without lifting the unit.
We set leg spacing and frame height to leave working room for filter swaps, coil access, and condensate lines on the panels your tech actually opens. The duct and pipe penetrations route through the frame instead of fighting it.
HSS members and plates are hot-dip galvanized so the steel holds up to standing rain, snow, and freeze-thaw on an exposed roof. The zinc coating carries the frame for decades without the rust bleed a painted stand develops up there.
Custom metalwork made in Canada gives contractors, property teams, and facilities tighter quality control, faster lead times, and fewer cross-border delays. The work is fabricated in our Toronto shop, with Canadian steel and other metals selected when the application requires them.
Your rtu supports is supported by Canadian-made fabrication, Canadian steel, clear local coordination, and a shop team close enough to solve site details before they become delays.
Rtu Supports is custom-fabricated or coordinated for commercial, industrial, municipal, institutional, retail, and construction sites, where fit, access, durability, and site conditions matter more than a stock product. The Grate Guys builds rtu supports around drawings, measurements, traffic duty, finish exposure, and installation constraints using mild steel, structural steel, galvanized finish, powder-coat, stainless details, or aluminum where the site calls for it, made to order in our Toronto shop, licensed, insured, and WSIB-covered, with a workmanship warranty on every order, supplied and installed across the GTA and shipped Canada-wide.
The custom metal grates were fantastic, I didn't expect them to be this good for the price, would be another customer for sure.
Their custom metal grates are great quality and well made. Very happy with the product and would recommend The Grate Guys.
The Grate Guys did a fantastic job with my custom metal grates. Their products, work, and customer service is top notch. Absolutely recommend!
Custom grates were fantastic, definitely use these guys!
Bollards they installed are phenomenal! This project I was working on needed bollards and they did not disappoint.
The Grate Guys did an amazing job on custom metal grates for a project I was working on.
Most rtu supports jobs in Etobicoke are driven by industrial units, lakefront corrosion exposure, apartment buildings, airport-area logistics, and retrofit openings. The Grate Guys treats each request as a practical scoping job: the quote starts with what must be measured, what load or use the part has to survive, and how the fabrication will reach the site.
The Etobicoke checklist for this product covers engineered loads, connection details, weld requirements, finish, delivery split, lifting access, and inspection coordination. That keeps the page tied to a real product and a real local project, with clear constraints, site details, and quote-ready information a buyer can act on.
Specifying rtu supports in Etobicoke? Talk it through with our team.
Custom metalwork fabricated in Canada in our Toronto shop, then a tidy install, coordinated with concrete, drainage, doors, and surrounding work where site work is in scope.
The short version: Rtu Supports are custom structural-steel assemblies fabricated to the engineered drawing and load spec. For Etobicoke projects, it's made to order for the actual opening, not a catalogue part.
Yes, we respond across Etobicoke and the surrounding area. Response time is 5-10 business days.
Across Etobicoke, the work concentrates around Northwest Etobicoke employment lands, Carlingview / Airport Corporate Centre, Islington-Rexdale industrial corridor, Queensway industrial area, South Etobicoke / Lakeshore employment lands, each job scoped to its own conditions.
Mostly aerospace (Bombardier legacy, De Havilland history), food and beverage processing, pharmaceuticals and chemicals, automotive aftermarket and parts, plastics and packaging, warehousing and urban logistics, The Grate Guys serves commercial, industrial, and institutional sites across Etobicoke.
In Etobicoke, the work accounts for structural steel and platforms for multi-tenant urban industrial, machine guarding and food-grade stainless for processors, mezzanines to add space on constrained urban lots, tight-site fabrication and crane-access planning, so the gauge, material, and finish is matched to the site.
Engineered to the structural spec, and in Etobicoke, spec'd to the load and environment on site.
The Grate Guys responds to Etobicoke with 5-10 business days, covering Northwest Etobicoke employment lands, Carlingview / Airport Corporate Centre, Islington-Rexdale industrial corridor, Queensway industrial area, South Etobicoke / Lakeshore employment lands and the surrounding area.
All of Etobicoke, Northwest Etobicoke employment lands, Carlingview / Airport Corporate Centre, Islington-Rexdale industrial corridor, Queensway industrial area, South Etobicoke / Lakeshore employment lands, plus surrounding service areas.
Yes, The Grate Guys serves aerospace (Bombardier legacy, De Havilland history), food and beverage processing, pharmaceuticals and chemicals, automotive aftermarket and parts, plastics and packaging, warehousing and urban logistics across Etobicoke, each scoped to its own building and use.
Cost depends on the size and complexity of the order, the materials, and the scope, The Grate Guys reviews the plans for each Etobicoke project and provides a clear, documented quote.
Yes, The Grate Guys assesses Etobicoke rtu supports on site and provides a documented scope before any work begins.
A 5-star Google rating, real knowledge of Etobicoke, Northwest Etobicoke employment lands, Carlingview / Airport Corporate Centre, Islington-Rexdale industrial corridor, Queensway industrial area, South Etobicoke / Lakeshore employment lands, 5-10 business days, work that is licensed, insured, and fully WSIB-covered, and full documentation on every order.
Yes, a 2-year warranty, and The Grate Guys is licensed, insured, and fully WSIB-covered on every Etobicoke job.
Yes, The Grate Guys is 5-star-rated on Google, trusted by Etobicoke property owners, managers, and contractors for documented, on-spec work.
Structural and plate steel, available raw, galvanized, or primed, matched to the load and environment of each Etobicoke site, not a fixed catalogue part.
Both, The Grate Guys fabricates the rtu supports, delivers the finished work across Etobicoke and the surrounding area, and installs it on site so it fits the opening; work for sites further out can be shipped with install coordinated.
Yes, our custom metalwork is fabricated in Canada in our Toronto shop. We use Canadian steel, and we specify stainless, cast iron, aluminum, or other metals when the application requires them.
Still have a question about rtu supports in Etobicoke? Ask our team directly.
Supplied and installed across Etobicoke. See all metal fabrication in Etobicoke →
Custom grates, gates, bollards, and structural metalwork, fabricated and installed for contractors, property managers, and industrial sites.
Send photos, drawings, measurements, or a description. The Grate Guys can quote rtu supports for Etobicoke, fabricated to spec, licensed, insured, and WSIB-covered.
Backed by our workmanship warranty, we stand behind every job · Licensed, Insured & WSIB-Covered
Tell us what you need and we’ll get you a quote. Free, no-obligation estimate.
The Grate Guys provides rtu supports, delivered and installed with quote-ready support across Toronto and surrounding Ontario communities.
Companies We've Worked With
The Grate Guys fabricates and installs custom metalwork for developers, contractors, institutions, and property groups across Ontario.
